Start typing and hit Enter

How to Grow Scindapsus hederaceus blue aurea in 5 Easy Steps

Categories Scindapsus

The Scindapsus hederaceus blue aurea, also known as the satin pothos, is a beautiful houseplant admired for its heart-shaped silvery leaves with dark green edges. This easy-to-grow vine plant can thrive indoors with minimal care. Follow these five simple steps to help your satin pothos grow lush and healthy.

Scindapsus hederaceus blue aurea

Choose the Right Potting Mix

Well-draining Soil is Essential

As a tropical plant that dislikes sitting in wet soil, the Scindapsus hederaceus requires a very well-draining potting mix. Choose a commercial indoor plant soil that contains ingredients like peat moss, perlite, bark chips or coconut coir. This creates lots of air pockets for drainage while still retaining some moisture. You can also make your own mix with equal parts potting soil, perlite and peat or coco coir. The potting media should feel lightweight and fluffy. Avoid regular garden soil since it compacts over time and prevents proper drainage.

Pick the Proper Pot

Plant your Scindapsus hederaceus in a pot with drainage holes to prevent root rot. Plastic and glazed ceramic pots work well and help the soil dry out faster between waterings. Choose a pot that’s slightly larger than the root ball but not oversized. Allow for future growth by moving up just one or two pot sizes at a time. Match pots to decorative cachepots without holes for displaying your plant. Take it back to the drainage pot after watering.

Water Thoroughly Then Allow Soil to Dry

Check Soil Dryness with Your Finger

Since Scindapsus enjoys moist but not wet soil, regulate your watering based on the soil dryness. Stick your finger an inch into the potting mix to check the moisture level before adding any water. If the top inch is dry to the touch, it’s time to water your plant. The soil underneath should still feel lightly damp. Always pour off any standing water in the saucer so the pot isn’t sitting in it.

To determine the best watering practices, you might find helpful tips in How to Grow Scindapsus in 5 Easy Steps, which covers essential aspects of Scindapsus care including soil moisture management.

Find the Right Watering Schedule

How often you’ll need to water depends on factors like your home’s temperature, humidity levels, light exposure, airflow, pot size and soil mixture. In general, Scindapsus requires watering once a week or every 10-14 days. New cuttings and smaller pots may need more frequent watering. Larger plants in bigger pots can go longer between drinks. Adjust as needed through the seasons too. Less water is required in cool weather when growth slows down.

Scindapsus hederaceus blue aurea

“Unleash the beauty of nature in your home with the Scindapsus hederaceus ‘Blue Aurea’! Click now to transform your space with this stunning, easy-to-care-for plant. Shop today and bring a touch of elegance to your surroundings!”

Provide Bright, Indirect Sunlight

Near a Bright Window is Best

The Scindapsus thrives in medium to bright indirect light, meaning no direct sun hitting the leaves. An east, west or lightly shaded south window is ideal in the home. Dappled sunlight filtering through a sheer curtain works great too. Solid dark curtains block too much sun resulting in fewer new leaves over time. If you don’t have a bright spot, consider supplementing with a grow light.

Supplement Light in Dark Rooms

If your space lacks sufficient natural light from windows, use an adjustable gooseneck grow light to supplement lighting levels. LED full spectrum grow lights are optimal for supporting photosynthesis. Position the light close enough to illuminated the satin pothos leaves without actually touching them. Start with 12-14 hours per day. Rotate the pot regularly so all sides get even coverage. Monitor and adjust the lighting as needed through the seasons.

Understanding the light requirements for this plant can be further elaborated by referring to Scindapsus 101: A Beginner’s Guide to Understanding and Growing. This guide offers detailed insights into the ideal lighting conditions for maintaining the health and vibrancy of Scindapsus plants.

Increase Humidity Levels

Misting Boosts Moisture

Scindapsus enjoys 40-60% relative humidity, much higher than most homes provide. Use a humidifier nearby to increase humidity in the surrounding air. Also mist the plant daily using room temperature purified or distilled water. Avoid hard tap water which can leave mineral deposits on the foliage. Grouping plants together helps create a moist little microclimate too. Just be sure to adjust your watering schedule since the soil will dry out slower with added humidity.

Pebble Trays Add Moisture

For extra humidity without purchasing equipment, place the pot on a pebble tray. Fill a shallow tray with pebbles and water just to the level below the stones. As the water evaporates over time, it increases humidity immediately surrounding the plant. Change the water every few days to prevent bacterial growth. Avoid letting the pot sit directly in water which can lead to root issues from excess moisture.

Scindapsus hederaceus blue aurea

Fertilize Regularly During Growth Periods

Use Balanced Liquid Fertilizer

Like most houseplants, Scindapsus benefits from monthly feedings during spring through early fall when actively growing. Use a balanced liquid fertilizer diluted to half strength. Look for equal parts nitrogen, phosphorous and potassium in the NPK rating on the label, such as 10-10-10. This provides all the essential nutrients plants need. Stop fertilizing over winter when growth naturally slows down to prevent salt buildup in the soil that could burn roots.

Mix Application Methods

Both foliar feeding and root feeding are effective application methods. For foliar spray, mix the fertilizer solution in a spray bottle and lightly mist all sides of the leaves and stems allowing time to soak in. Avoid wetting the flowers or soil. For root feeding, pour the diluted fertilizer evenly over the moist soil around the drip zone at the pot’s edge allowing it to soak in. Gently scratch fertilizers into just the top layer of soil. Always flush the soil with clean water every few months to prevent fertilizer salt accumulation.

Propagate With Stem Cuttings

Select Healthy Stems

To grow more Scindapsus for free, propagate new plants from cuttings. Use clean scissors or pruners to snip off healthy stems right below a leaf node where aerial roots often form. Cuttings root quickest in spring through summer. Take several 3-6 inch long sections which root faster than longer vines. Always get cuttings from vigorous healthy mother plants, not weak or damaged stems.

For those interested in propagation techniques, the article Scindapsus Breeding Technique in 5 Simple Steps provides comprehensive guidance on how to successfully propagate Scindapsus plants, ensuring healthy growth and multiplication of your collection.

Root in Water or Soil

Place each freshly cut stem tip directly into a small jar of room temperature water. Change the water every few days. Or stick directly into a pot of damp propagation or seed starting mix. Enclose either setup under a glass dome or plastic bag to increase humidity which encourages faster rooting. Provide bright indirect light. Look for new white root growth in 3-5 weeks for water propagation or a bit longer in soil. Plant the newly rooted cuttings into potting mix once the root system is well established. Then continue caring for it as a mature plant.

Where to buy Scindapsus hederaceus blue aurea? Benefits from importing plants from Thailand

  • Shipping: Door to door shipping, fast and safe with Dragon Courier
  • Biodiversity: Thailand is known for its rich biodiversity, including a wide variety of aroid species. This diversity allows importers to access a broad range of unique and exotic aroid plants.
  • Quality and Health of Plants: The suitable climate helps the plants grown here stay healthy and of high quality.
  • Cost-Effectiveness: Due to favorable growing conditions and efficient production methods, Thai aroid plants can often be more cost-effective compared to those from other countries.
  • Access to Hybrid Varieties: Thai growers are often involved in the development of new hybrid aroid varieties, offering unique plants that may not be available from other sources.

Scindapsus species are the most sought after by aroid plant lovers

Conclusion

Caring for a Scindapsus hederaceus blue aurea really is easy when you focus on these core elements – proper soil, drainage and watering habits, adequate light and humidity, regular feeding, and propagating new plants from cuttings. In no time at all your satin pothos will flourish into a gorgeous trailing specimen brimming with stunning silver-blue foliage. Consistently providing this vine’s basic needs encourages lush growth for your enjoyment for years to come.

FAQ

  1. What is Scindapsus hederaceus ‘Blue Aurea’? Scindapsus hederaceus ‘Blue Aurea’ is a rare and unique variety of the Scindapsus genus, known for its distinctive blue-green foliage. It’s a tropical plant that thrives in humid environments and is often sought after by plant enthusiasts for its unusual coloration.
  2. How do I care for my Scindapsus hederaceus ‘Blue Aurea’? To care for your Scindapsus hederaceus ‘Blue Aurea’, provide it with indirect, bright light and water it when the top inch of soil feels dry. This plant prefers high humidity, so consider placing it in a bathroom or using a humidifier. Avoid overwatering, as this can lead to root rot.
  3. Can Scindapsus hederaceus ‘Blue Aurea’ purify air? Like many houseplants, Scindapsus hederaceus ‘Blue Aurea’ can help purify the air in your home. It’s known for removing toxins such as formaldehyde and xylene, making it not only a beautiful but also a functional addition to your space.
  4. Is Scindapsus hederaceus ‘Blue Aurea’ toxic to pets? Yes, Scindapsus hederaceus ‘Blue Aurea’ is toxic to pets if ingested. The plant contains calcium oxalate crystals, which can cause irritation and swelling in the mouth and gastrointestinal tract. It’s best to keep this plant out of reach of curious pets.
  5. How fast does Scindapsus hederaceus ‘Blue Aurea’ grow? The growth rate of Scindapsus hederaceus ‘Blue Aurea’ is moderate. With proper care and suitable growing conditions, it can grow steadily but won’t become overly large quickly. Regular pruning can encourage fuller growth and maintain its size according to your preference.

Leave a Comment


Limited Time Offer: Buy 6 Items and Get 5% Off
×
×